If you have a safe that will not open and have lost the combination, a locksmith for safes can reset it. They can also do the same for a safe that has been bequeathed to you, or is discovered after a death in the family. They can also use a special tool called a safe chisel that has a long and flattened tip to break through the inner lock mechanism. This method is not as quick as drilling but does not damage the contents inside of the safe.
There are many reasons why your safe won’t open, ranging from dead batteries to a jammed bolt work system. Some of these problems are easy to solve, while others require a locksmith for safes to help resolve them.
Dead batteries are one of the most common reasons a safe will not open. The first sign that this is the problem will be a longer series of beeps than usual when you input your code, or a message that says the batteries are low.
Another reason your safe may not be opening is that the combination has shifted. This can be caused by a number being added or subtracted from the original code and can sometimes be corrected. Adding or subtracting a number from each of the numbers on the dial should help the combination shift back to the correct position. If this does not fix the problem, you can try removing a few of the large weights on the bottom of the safe to see if that helps.
You can also try to wiggle the handle a little bit. Most of these safes are designed to have a certain amount of play when locked, and this can be enough to get the dial working again. You can also use a fork to pry the dial panel off of the safe, but this is not recommended since it could cause damage to the safe’s interior.
If your safe has been bequeathed to you or is found after a relative’s death, it is possible that they never set the combination to the safe and have no record of it. This is not an uncommon situation, and a locksmith for safes can easily help you get your belongings out of the safe.
Some safes are made of very thick materials that make it difficult for safecracking tools to be used. These types of safes are typically referred to as Group 2 or Group 2M safes, and they are more secure than other models. If you have a Group 2 or 2M safe that will not open, there is a chance that the bolts are stuck and that you need to call for the services of a locksmith for safes to fix this. It is not an ideal solution, however, because this can be a messy and expensive process. It is also not an option for people who have valuables or heirlooms in the safe. Locksmith safe opening